Skip to content

Free roof inspection, and the building rules put plainly: (919) 820-8641

(919) 820-8641
Worker in a cap and tool belt on an aluminum ladder drilling a white gutter onto the fascia of a brick ranch house, with a white downspout on the corner

ServicesGutters

Gutter Repair and Installation in Raleigh

We repair the gutters you have and install new one-piece aluminum gutters sized for your roof and sloped so water reaches the downspouts. It starts with a free roof inspection, since many gutter problems begin at the roof edge, and you get a photo report of what we found.

Where your roof's water goes after it leaves the shingles

The roof's job is to shed rain. The gutters handle the rest, steering it off the house and away from the ground around it. Once a run starts to droop, fills with debris or turns out too small, water spills over the lip, wets the fascia and drops beside your foundation. Left alone, that small issue becomes rotted trim, a damp crawl space or a heaved sidewalk.

We approach gutters with a roofer's eye. The drip edge needs to tuck into the gutter, the hangers need to hold the weight of a full trough, and the downspouts need to empty well clear of your home. Building codes spell out how a roof edge is finished and flashed, and we hang gutters so they work with those details.

Plenty of homes just need a handful of fixes. Some need everything replaced. We will tell you which group yours falls into and show you the photos behind that answer.

What we cover on a gutter job

One-piece aluminum gutters

Our machine forms each gutter in your driveway, cut to fit the full eave. Joints only show up where a corner turns or a downspout drops, which leaves far fewer spots for leaks to start.

Correct size and fall

We match gutter width and downspout size to the square footage and pitch of the roof above. A steep slope draining into a long eave may call for a wider gutter or a second outlet, and we set an even fall so nothing pools.

Downspouts that carry water away

Outlets go where they can move water clear of your foundation, paths and driveway. Where the grade needs help, we add extensions or splash blocks.

Roof edge and fascia review

Before anything new goes up, we check the drip edge and the boards behind it. Any soft or rotted wood is photographed and shown to you rather than covered over.

Gutter guards

When leaves and pine straw pack your gutters each fall, we can install guards that block most debris and still take in a hard rain.

Repairs and haul-away

We reseal dripping corners, refasten sagging runs and swap out damaged sections. When we finish, the old metal, hangers and offcuts go with us.

How to tell your gutters need work

  • Overflow during heavy rain

    When water pours over the front edge in a summer downpour, something is holding it back. It may be a clog, a trough that is undersized for the roof above it, or a run that tilts away from the downspout instead of toward it.

  • Dips and gaps at the fascia

    A gutter that droops or tilts out from the house usually has broken hangers or screws that have lost their grip in soft wood.

  • Streaks, flaking paint or rot

    Dark lines on siding or peeling paint under the gutter mean water is getting behind it instead of flowing through it.

  • Puddles and erosion by the foundation

    Ruts in the mulch, standing water or bare soil under a downspout show that water is landing too close to your home.

  • Dripping joints and rust

    Leaks at corners and seams, or rust spots on older steel gutters, mean the sealant or the metal has reached the end of its life.

What to expect from start to finish

  1. 1

    Inspection at no cost

    Our visit covers the roof edge, drip edge, fascia and existing gutters, and we trace how water moves off each slope. Afterward you receive a photo report of everything we noted.

  2. 2

    Our recommendation, explained

    We tell you whether repairs or new gutters make sense, what sizes we would use and where each downspout should go. You get your quote by phone or in person, broken out line by line.

  3. 3

    Installation

    We remove the old gutters, repair or point out any fascia trouble, then form and hang the new ones. Most homes are done in a single day, and you do not have to be home while we work.

  4. 4

    Flow check and tidy-up

    We run a hose through every section to confirm the fall and the outlets. Then we pick up old metal, screws and debris so your yard looks the way we found it.

What moves the price of gutter work

Two things shape most gutter quotes: how much gutter your home needs and how easy it is to get to. We go over each line with you before anything is ordered, so you know what you are paying for and why. If you would rather pay over time, financing is available through Acorn Finance.

Total footage and rooflines
Every extra roofline adds gutter, corners and outlets. A home with dormers, porches and offsets takes more material and labor than one long eave on each side.
Gutter size and guards
Wider gutters and larger downspouts use more metal, and guards are an added line. We suggest them only when your roof pitch or nearby trees make them worthwhile.
Height and what sits below
Second-story eaves, sloped yards, decks and planting beds take more ladder setup and care to work around than a single-story edge over open lawn.
Condition of the wood behind
Gutters can only hang as well as the fascia they are fastened to. If boards are soft or rotted, replacing them goes on the quote, and the photos show you exactly why.

Common questions about gutters

Something not covered here? (919) 820-8641

Do I need a permit to replace my gutters?

Replacing gutters by themselves usually does not require a building permit, but we check what applies to your home before work begins. When new gutters go up as part of a roof replacement, they fall under that project and its inspection. If you live in an HOA, it may have rules about gutter color or profile, so it is worth checking with them.

Is it smart to replace gutters along with a new roof?

In many cases, yes. The gutters have to come off when the drip edge is replaced, and putting tired gutters back on can scuff or bend the new roof edge. If yours are still solid, we can take them down carefully and hang them again once the roof is done.

Do gutter guards really help?

They earn their keep on homes shaded by oaks and pines, where gutters clog quickly. Guards mean fewer cleanings, but no guard makes gutters maintenance-free. If your gutters stay mostly clear on their own, you probably can skip them, and we will say so.

Does homeowners insurance cover storm-damaged gutters?

Gutters bent by hail or ripped loose by wind are commonly included in a storm claim. We can meet your adjuster on site and help you through each step of the claim, and our Storm Damage Repair page explains more. Coverage decisions are up to your insurance company.

My gutters are clean. Why do they still spill over?

Clean gutters can still overflow when they are too narrow for the roof feeding them, sloped back toward the corner or stretched too far between downspouts. A free inspection usually pinpoints the cause.

Two-story brick house with a new dark gray shingle roof, a ladder against the garage eave, and shingle bundles, tarp and buckets in the driveway

Ready to send rainwater where it belongs

We will look over your roof edge and gutters, photograph anything that concerns us and tell you plainly whether a repair will do or new gutters make more sense.